TM 5-4610-228-13
TM 08846A-13/1
5-10 NOZZLE ASSY/REPAIR
LOCATION/ITEM
ACTION
REMARKS
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m
n.
o.
Disconnect S-hook (22) from guard (21).
Remove S-hook (22) from chain (23).
Remove tube cap (25) and S-hook (24) from chain (23). Disconnect S-hook from tube cap.
Drive out hollow pins (18 and 20). Remove guard (17) from body (3)
Drive out hollow pin (19) and remove lever (16) from guard (21).
Remove gasket (11) from coupling half (10).
Remove swivel (9) and coupling half (10) from body (3).
Unscrew coupling half (10) from swivel (9).
Remove packing nut (14).
Pull stem (15) from body (3).
Remove packing gland (13) and packing ring (12).
WARNING
Remove cap (8) slowly. Spring tensionmay cause cap (8) to fly off.
Remove cap (8) and spring (7).
Remove poppet (6), disc (5) and disc nut (4) from body (3) and disassemble.
Remove jam nut (2) and tube (1) from body (3).
Remove jam nut (2) from tube (1).
a. Clean all components with clean water and detergent.
b. Rinse components in clean water and dry with wiping rag.
a. Inspect body (3) for cracks and stripped or damaged threads.
b. Inspect guard (21) and lever (16) for cracks.
c. Inspect tube(1) for bends, cracks, and deformation.
Change 2 5-17
