TM 5-4610-228-13
TM 08846A-13/1
b. Remove input flow (discharge) side of tank protective cap from the quick-disconnect male nipple on suction
side port of tank numbered 1 on page 2-29. Retain cap for use during system disassembly. Connect the
quick-disconnect female fitting furnished with tank to male nipple on tank.
Prior to connecting any hoses, be sure to inspect all female quick-disconnect
fittings to insure that required gaskets are present and serviceable. Install/
replace gaskets as required.
NOTE
Install all gate valves with control handles in upright and closed position.
c. Connect suction hose assy (16) to suction side port male nipple of tanks installed in step b, above.
d. Connect valve and tee assy (12) to hose assy (16).
e. Remove protective cap from left-hand side of valve and tee assy (12).
2-30
