TM 5-5430-211-13 & P
3-15
DISCHARGE ASSEMBLY-CONTINUED
ITEM
ACTION
REMARKS
INSTALLATION-CONTINUED
Put the 5/8 inch end wrench on a
If the bolts are not
bolt. Torque the nuts down to 40
tightened evenly and in
inch lbs. in the sequence shown.
the correct sequence, the
Torque the bolts down to 100
parts will not lie parallel
inch lbs. in the same sequence.
and water will leak
through.
DO NOT OVER TIGHTEN
2.
'O' Ring Gasket
Smear the new gasket with a
The petroleum jelly helps
THIN film of petroleum jelly.
the gasket to bed down
Place it in the groove of the
evenly.
compression ring.
3-44
