TM 5-5430-212-13&P
a.
Installation of Tie-down Kit and Bed Cloth (Model 91094 Only)
(1)
Clear truck bed of splinters, protruding nails and other foreign objects that could puncture or chafe the tank. Place
bed cloth on truck bed forward; unroll to rear (Model 91094 only).
(2)
The tank shall be secured to the trailer with a four-belt tie-down kit. This kit is made and assembled in accordance
with Figs. 2-2 and 2-3 or 2-3A. There are two anchor points (Fig. 2-3 or 2-3A) per strap to provide maximum
support to the tank during transport. Each anchor point consists of a 5/8" diameter eyebolt, two retaining plates,
one 5/8" hex nut, one lockwasher assembly and, for Model 91094 Tie-down Assembly, one flat washer.
Figure 2-2. Semi-Trailer Anchor Assembly
2-3
Change 3
