SECTION 1
GENERAL
1.1
When factory adjusted, the Kidde Marine Smoke Detector (KMSD) meets the requirements of the U.S. Coast
Guard as defined in 46CFR161.002-15.
1.2
The KMSD system continuously monitors all compartments into which a pipeline is installed. Air samples are
continuously and simultaneously drawn through all CO2 pipelines to the smoke detector cabinet where each line is
continuously monitored for smoke by means of an individual light source and photoelectric cell.
1.3
Smoke detectors are supplied in models having 1 through 48 line capacity.
1.4
The Smoke Detector System, KMSD, is designed to be used alone or in conjunction with a Kidde marine-type CO2
system.
1.5
When installed, a KMSD system consists of the following principle elements:
a.
Smoke detecting cabinet assembly
b.
Suction fan blower cabinet assembly
c.
Three-way valves installed in the C02 system manifold
d.
CO2 system pipework
e.
Pipework exclusive to smoke detection system
f.
Accumulators installed in lieu of nozzles on the CO2 system
g.
Olfactory (sniffer) valve normally installed in the wheelhouse
h.
Optional repeater panel
i.
8-inch alarm gongs: 2 required per installation
j.
Automatic condensate drain valves, where required
1.6
Models with 25 to 48 line capacity have the following additional elements:
k.
Slave detecting cabinet
l.
Second suction fan blower assembly
1.7
Three elements are covered in this manual:
a.
Smoke detecting cabinet
b.
Suction fan blower assembly
c.
Repeater panel
1-1
