7. Place the sandpaper between the brush and slip ringwith the abrasive side of the sandpaper against thebrush.9. Slowly pull the sandpaper from beneath the brush.8. Place the spring in the middle notch of the retainer.10. Remove all dust with a suction hose. If suction isnot available, use a maximum air pressure of 30 psi (2kg/cm2). Do not use metal tips.11. Check brush tension and adjust if necessary.12. Install the three rear panels that were removed.23
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
