TM 9-2330-267-14&P
4-31. HANDBRAKE CABLE REPLACEMENT (Con’t).
4.
Remove cotter pin (13), Iockwasher (14), straight-headed pin (15), and disconnect clevis (11) from handbrake
lever (12). Discard cotter pin and Iockwasher.
5.
Remove two bolts (18), Iockwashers (16), nuts (9), and bracket (17) from frame crossmember. Discard
Iockwashers.
6.
Remove spring (8) from handbrake cables (3).
7.
Remove handbrake cable (3) from trailer
8.
Remove clevis (11) and nut (10) from handbrake cable (3).
b .
INSTALLATION
1.
Install nut (10) and clevis (11) on handbrake cable (3).
2.
Position handbrake cable (3) on trailer frame assembly. Install spring (8) on handbrake cables (3).
3.
Position handbrake cable (3) on frame crossmember and install two bolts (18), bracket (17), two new
Iockwashers (16), and nuts (9).
4.
Connect clevis (11) to handbrake lever (12) with straight-headed pin (15), new Iockwasher (14), and new cotter
pin (13).
5.
Insert handbrake cable (3) in backing plate (1).
6.
Install two nuts (4), new lockwashers (5), access cover (7), and guide bracket (6) on backing plate (1).
7.
Connect handbrake cable (3) to brake lever (2).
TA507022
4-51
