WATER TANK BODY MAINTENANCE (FIBERGLASS) (cont)

WATER TANK BODY MAINTENANCE (FIBERGLASS)

WATER TANK BODY MAINTENANCE (FIBERGLASS) (cont) - TM-9-2330-267-14P_158

TM-9-2330-267-14P Truck Utility; S250 Shelter Carrier 4x4 M1113 (2320-01-412-0143) (EIC:B6B) Manual
Page Navigation
148

TM 9-2330-267-14&P 4-56. WATER TANK BODY MAINTENANCE (FIBERGLASS) (Con’t). 4. 5. 6. 7. 8. b. CLEANING AND REFINISHING INTERIOR Remove gasket (16) and sleeve (15) from water tank body (1). Discard gasket. Install slings on water tank body (1) and connect to suitable lifting device. Cut and remove Iockwire (8) from four capscrews (7). Discard Iockwire. NOTE Washers (6) are used on Ml 49 only. Remove four cap screws (7), washers (6), mounts (5), spacers (4), washers (3), and spacers (2) from brackets , (9). Discard mounts. WARNING All personnel must stand clear of hoist when raising or lowering water tank body. Failure to follow this warning may result in serious Injury or death to personnel. Carefully remove water tank body (1) from frame. NOTE Refer to FM 21-10 for further Information on cleaning and disinfecting procedures. 1. Open manhole cover on water tank body. 2. Remove drain plug from water tank body. TA507066 4-107

Privacy Statement
Press Release
Contact