TM 9-2330-267-14&P
S e c t i o n X I I . B O D Y M A I N T E N A N C E
Page
Paragraph Title
Number
Manhole Cover Maintenance (Fiberglass Tank) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-102
Manhole Cover Maintenance (Stainless Steel Tank) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-104
Piping and Faucet Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-114
Rear Faucet Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-116
Water Tank Body Maintenance (Fiberglass) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-106
Water Tank Body Maintenance (Stainless Steel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-110
4-54. MANHOLE COVER MAINTENANCE (FIBERGLASS TANK).
This Task Covers:
a.
Removal
c.
Assembly
b. Disassembly
d.
Installation
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
l Three cotter pins
l General mechanic’s
l Twelve Iockwashers
tool kit
a.
REMOVAL
1.
Turn wingnut (7) counterclockwise to release bracket (9). Swing eyebolt (10) away from bracket.
2.
Remove four screws (2), lockwashers (1),
3.
Remove four screws (11), lockwashers
Iockwashers.
b .
DISASSEMBLY
and hinge assembly (32) from tank assembly. Discard lockwashers.
12), and hinge plate (13) and eyebolt (10) from tank assembly. Discard
1.
Remove cotter pin (15), straight pin (14), and eyebolt (10) from hinge plate (13). Discard cotter pin.
2.
Remove nut (8) and wingnut (7) from eyebolt (10).
3.
Remove cotter pin (3), straight pin (31), and hinge assembly (32) from bracket (9). Discard cotter pin.
4.
Remove cotter pin (4), flatwashers (5 and 16), spacers (6 and 17), straight pin (18), and bracket (9) from pivot
assembly (28). Discard cotter pin.
5.
Remove four screws (30), Iockwashers (29), and pivot assembly (28) from cover (27). Discard Iockwashers.
6.
Remove nut (21) and adapter (20) from cover (27). Remove valve (19) from adapter.
7.
Remove seal (25), inner cover (24), insulation (23), bushing (22), and plate (26) from cover (27).
4-102
