TM 9-2330-267-14&P
4-53. RADIUS ROD MAINTENANCE (Con’t).
4.
5.
6.
7.
8.
Remove screw (10), Iockwasher (11), flatwasher (12), and bumper (13) from bracket (20). Discard Iockwasher.
NOTE
Remove screw (14) only if replacement of screw is required.
Loosen screw (14) on radius rod (4).
Remove locknut (15), nut (16), and capscrew (22) from bracket (20). Discard locknut.
Remove two shouldered washers (17) and bushings (18) from bracket (20).
NOTE
Measure and record distance (A) between connectors before removing radius rod.
Remove sleeve bearing (21), two flatwashers (19), and radius rod (4) from bracket (20).
b.
DISASSEMBLY
Remove two screws (24), nuts (27), Iockwashers
(26), and connectors (23) from rod (25). Discard
Iockwashers.
c.
ASSEMBLY
Install two connectors (23) on rod (25) with two
screws (24), new Iockwashers (26), and nuts (27).
TA507061
4-100
