TM 9-2330-267-14&P
4-51. SPRING ASSEMBLY REPLACEMENT (Con’t).
NOTE
Two people are required to remove spring as-
sembly from brackets.
2.
Remove two bolts (6) and nuts (5) from two
brackets (1) and spring assembly (4) at each end
of spring assembly.
3.
Remove spring assembly (4) from two brackets
(1).
4.
Loosen two set screws (7) and tap pin (8) free of
bracket (1).
5.
Remove two bushings (11) and roller assembly
(10) from bracket (1).
6.
Remove grease fitting (9) from pin (8).
7.
Repeat steps 4 through 6 for remaining bracket
(1).
b. INSTALLATION
1.
Install grease fitting (9) in pin (8).
2.
Position two bushings (11) and roller assembly (10) in bracket (1).
3.
Tap pin (8) into position and tighten two set screws (7).
NOTE
Two people are required to install spring assembly.
4.
Repeat steps 1 through 3 for remaining bracket (1).
5.
Position and support spring assembly (4) in two brackets (1).
6.
Install two bolts (6) and nuts (5) in two brackets (1).
TA507057
4-96
