Table 4-1. Organizational Preventive Maintenance Checks and Services (PMCS) (Cont)

GENERAL PMCS PROCEDURES (Cont) - TM-9-2330-267-14P_54

Table 4-1. Organizational Preventive Maintenance Checks and Services (PMCS) (Cont) - TM-9-2330-267-14P_56

TM-9-2330-267-14P Truck Utility; S250 Shelter Carrier 4x4 M1113 (2320-01-412-0143) (EIC:B6B) Manual
Page Navigation
46

TM 9-2330-267-14&P Table 4-1. Organizational Preventive Maintenance Checks and Services (PMCS) (Con’t). Q - Quarterly S - Semiannual A - Annual ITEM INTERVAL ITEM TO BE NO. INSPECTED Q S A PROCEDURES 3 BRAKES a. Check brake adjustment for ½ in. (12.7 mm) minimum and ¾ in. (19.1 mm) maximum pushrod travel in master cylinder and air- brake chamber (para 4-39). b. Check master cylinder fluid level. Fill to within ½ in. (12.7 mm) from top (Chapter 3, Section l). c. Clean, inspect, and repair or replace internal service brake parts as required (para 4-32). d. Adjust brakeshoes (para 4-32). e. Check handbrake cable adjustment. Adjust as required (para 4-31). f. Remove and clean air filter element. Replace if unserviceable (para 4-41). 4 INTERVEHICULAR AIR HOSES Check intervehiclar air hoses for cuts, breaks, and damaged air couplings. Replace if defective (para 4-37 or 4-38). 5 AIR RESERVOIR Check air reservoir and lines for damage and ensure that fittings are tight. Replace air reservoir if it is damaged (para 4-40). 6 WHEEL BEARINGS Remove wheel hubs and wheel bearings. Clean, inspect, and pack wheel bearings (para 4-45). 7 WHEELS AND TIRES a. Inspect tires for wear and damage. Check tread depth (TM 9-2610-200-24), b. Torque wheel nuts to 340-370 Ib.-ft. (461-502 N•m) (para 4-43). 8 FRAME Inspect for cracks, bent members, and broken welds. 4-5

Privacy Statement
Press Release
Contact