TM 10-4610-234-13
c. Dual Tank Connection Kit Assembly. Assemble dual tank connection kit as follows:
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
To prevent contamination of drinking water, make sure water tank el-
bows are capped and plugged when system hoses are not connected
to tank.
NOTE
Install all gate valves with hand wheel in upright position and valve fully
closed.
To aid assembly, work from the water tanks back to the 125 GPM pump
connection kit. Adjust spacing between water tanks and reposition con-
nection kit components as needed to prevent kinks in hoses.
Suction hoses are noncollapsible and discharge hoses are collapsible.
Connect suction hose (20 ft) (14) to discharge elbow (male) on water tank (13).
Connect suction hose (20 ft) (19) to discharge elbow (male) on water tank (18).
Connect tee and gate valve assembly (15) to suction hose (14).
Connect tee and gate valve assembly (17) to suction hose (19).
Connect suction hose (20 ft) (16) between tee and gate valve assemblies (15 and 17).
Connect suction hose (10 ft) (26) to tee and gate valve assembly (15).
Connect discharge hose (20 ft) (24) to filler elbow (female) on water tank (18).
Connect tee and gate valve assembly (20) to discharge hose (24).
Connect discharge hoses (20 ft and 10 ft) (21 and 22) to tee and gate valve assembly (20).
Get tee (23) from accessory connection kit. Connect tee to discharge hose (22).
Connect discharge hose (20 ft) (12) to filler elbow (female) on water tank (13).
Connect tee and gate valve assembly (11) to discharge hose (12).
Connect discharge hose (10 ft) (10) to tee and gate valve assembly (11).
Connect discharge hose (10 ft) (25) to discharge hose (10) and tee (23).
Connect tee (23) (from accessory kit) to reducer (9) on 125 GPM pump connection kit. (See con-
nection points A-A.)
2-23