Disconnect fuel lines (34) from the junction
Disconnect drain hose (35) from the water
Fasten a hoist to the engine.
Remove bolts (36) and the upper half of mount
assemblies (37) from the engine front support.
Remove bolts (39) from the two engine rear
support brackets, brace assembly (38) and the
upper halves of the mount assemblies.
Put tooling (A) in position under the torque
converter for support.
Remove the bolts, washers, two clips and strap
that hold the torque converter housing to the
Move the engine forward enough to remove the
flywheel ring gear from the torque converter.
Remove the engine. The weight of the engine
is 1540 lb. (693 kg).
CAUTION: Do not cause damage to the oil pump
suction bell assembly when the engine is removed.