TM 5-3825-226-24
DIFFERENTIAL AND CARRIER ASSEMBLY (LOCK TYPE)
26.
Remove the lockwire from the two bolts (34)
and remove the bolts.
26A.
Staighten lock tabs from two bolts (34) and
remove bolts and locks.
27.
Remove jaw (32), nut (33) and bearing cup (35)
from the differential group.
NOTE: On current models, cotterpins, nuts and bolts
are replaced with bolts and washers.
28.
Remove the cotter pins from the bolts and
remove nuts (36), the bolts and case (37) from
the differential group.
29.
Use tooling (F) and remove bearing cone (38)
from case (37).
30.
Remove thrust washer (39) and side gear (40)
from the differential group.
31.
Remove the pinions and spider (41) as a unit
from case (42).
3-236