TM 5-3825-226-24
DIFFERENTIAL AND CARRIER ASSEMBLY (LOCK TYPE)
d)
Remove ring (23) that holds the jaw in
cylinder (19). Remove spacer (24) and
the washer.
e)
Remove jaw (25) and the washer from
cylinder (19).
f)
Use a press and tool (E) to remove the
piston from cylinder (19). Remove the
seals from the piston.
21.
Remove the lockwire from bolts (26) and (28).
22.
Remove bolts (26), locks (27) and bolts (28)
from each side of the carrier assembly.
23.
Put identification marks on the two bearing caps
(29) for assembly purposes. Remove the
bearing caps from the carrier assembly.
24.
Put a bar through the differential group. Fasten
a hoist and remove the differential group from
the carrier assembly. Weight of the differential
group is 115 lb. (52 kg).
25.
Remove bearing cup (30) and nut (31).
3-235