Install a new plate (16) with the cloth side towards
the desiccant (17).
Make sure the shoulder (23) on the bolt is above
the plate. Use a soft hammer to hit the side of
the cartridge shell to make the desiccant go down
Put the spring (15), seat (14) and rebuilt desiccant
sealing plate (8) over the bolt.
Put the nut (9) on the bolt and tighten it several
turns. To make the desiccant go into place (settle
into place), hit the side of the cartridge shell
several times with a soft hammer.
Put some of the lubricant from the repair kit on
the seals (13).