2-9.3.5 350 GPM Pump Connection Kit - Output Flow Side
Attach the tee assy for the output side 350 GPM pump connection kit. Attach hoses and valve and tee assys for
tanks 8 through 16. Following installation of the valve and tee assys on the suction side of the tank numbered 8
and on the input side of the tank numbered 9, a 10-foot hose should be installed between the valve and tee assy
for the water tank and the tee assy for each of the 3.50 GPM pump connection kits (17 and 18, page 2-29).
Remember to install tee assys (19 and 20) for the second discharge hose interconnection kit as specified and to
connect the ten 20-foot discharge hoses in the position shown on page 2-29. AFter installing the hoses, valves, and
tee assys for tanks 15 and 16, be sure to attach a protective cap to the right-hand end of the two valves and tee
assys for these tanks.