Operation Instructions (continued)
Storage and Repackaging Instructions
Tank Preparation for Storage (continued)
Inflate tank to no more than three feet in height with air allowing air to escape through
Caution: Do not over inflate tank.
Tank should be aired in this manner for approximately ½ hour or until all liquid has
Shut off air, remove air hose and let tank deflate.
Remove standpipe from vent fitting.
Install dust cap on manhole cover plate (if applicable). All tank openings should be
covered with caps or protective covering to keep clean.
Cleaning, Folding and Rolling Tank for Storage
Place hose vent assemblies on ground at end opposite filler/discharge/manhole fitting. All
auxiliary and accessory hardware is to be repacked into hardware shipping container.