Operation Instructions (continued)
Cleaning, Folding and Rolling Tank for Storage (continued)
Fold sides of tank towards longitudinal center line so that the two sides will meet at the center line
until folded width is approximately 6 feet.
Fold and begin rolling tank toward filler/discharge/manhole fitting.
Clean and brush off all stones and miscellaneous debris that may be picked up from the ground.
Care should be taken not to damage tank by rough handling or careless storage. In the event a
metal clamp repair has been made, avoid folding the tank in such a manner as to cause damage
to the tank.
Repack and store accessories and auxiliary equipment in box.
When tank is not in use for any length of time, it is important that it be stored under a cover or in a
container so as to be out of the direct exposure to sunlight. In this manner optimum life may be
Lubrication and Cleaning
Lubrication. There is no lubrication required for the 50, 000 gallon collapsible water tank.
Exterior Cleaning. Dirt on the tank and tank accessories should be flushed off with water.