TM 10-3835-223-13&P
4-29. FRAME WELDMENT REPAIR.
This task consists of:
INITIAL SET-UP:
Tools required:
a. Disassembly
b. Repair
c. Assembly
Tool Kit, General Mechanics, Automotive (Appendix B, Section III, Item 1)
Equipment Condition:
Power pack removed from frame unit (para. 2-8a.)
Upper cylinder side guards removed (para. 4-21).
a.
Disassembly.
(1)
Remove nut (8), starwasher (7), washer (5), retainer plate (6), and screw (4) from frame
weldment (2).
b.
c.
(2)
Remove four nuts (9), lockwashers (10), washers (11 and 12), and screws (13). Remove
storage bracket (14) from frame weldment (2).
(3)
Remove lifting pins (3) from stacking posts (1).
(4)
Slide stacking posts (1) from frame weldment (2).
Repair. Replace damaged components.
Assembly.
(1)
(2)
(3)
(4)
(5)
Position stacking posts (1) in frame weldment (2). Position stacking posts so that lift pin
mounting holes aline with cutouts in weldment (2).
Screw lifting pins (3) into stacking posts (1).
Position storage bracket (14) in frame weldment (2). Install four washers (11 and 12), four
screws (13), four lockwashers (10) and four nuts (9).
Install screw (4), washer (5), retainer plate (6), starwasher (7) and nut (8) on frame
weldment (2).
Install upper cylinder side guards (para. 4-21).
4-56
