TM 10-3835-223-13&P
5-4. VALVE STATION REPAIR - cont.
(6)
Position retainer plate (5) and four o-rings (9) on manifold (8).
(7)
Position sandwich valve (13) and control valve (16) over studs (2). Make sure valves are
installed in correct position on manifold.
(8)
Install four socket head nuts (1) on studs (2). Tighten nuts in a cross pattern.
(9)
Install four studs (18) on manifold (8).
(10)
Position retainer plate (11) and four o-rings (10) on manifold (8).
(11)
Position sandwich valve (14) and control valve (17) over studs (8). Make sure valves are
installed in correct position on manifold.
(12)
Install four socket head nuts (19) on studs (18). Tighten nuts in a cross pattern.
5-11
