TM 10-3835-223-13&P
2-4. INTRODUCTION-continued
NOTE
The terms ready/available and mission capable refer to the same status: equipment is on hand and is able to
perform its combat missions. (See DA PAM 738-750).
2-5. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES
NOTE
Within designated interval, these checks are to be performed in the order listed. Remove/Install power pack as
required to perform your PMCS.
B - Before
Table 2-1. Operator Preventive Maintenance Checks and Services.
D - During
A-After
Interval
Item
Item to Be
Procedure Check for
Equipment Is Not
No.
Inspected
and have repaired or
Ready/Available
B
D
A
adjusted as necessary
If:
1
l
Hose Reel
Inspect entire unit for
Major components are
System
physical damage. Check
missing.
that all major components
are present.
Power Pack
2
l
l Guard
Inspect panel guard for
Crack, dents, tears, or
cracks, dents, or tears.
missing fasteners prevent
Check for missing fasteners. secure mounting of panel
guard.
3
l
l
Control Cable
a. Inspect for cracked,
Switch knobs cracked,
broken or missing switches.
broken or missing.
l
l
b. Inspect electrical cable
Insulation is cut to bare
for cuts, frayed insulation,
wire. Wires are exposed.
and exposed wiring. Check
for signs of overheating.
l
c. Inspect cable connector
Cable connector shell is
shell for cracks, bent pins,
damaged. Connector pins,
and missing cap.
bent or broken.
4
l
Hydraulic
a. Inspect hoses and fittings Hoses cut, torn or bulged.
Hoses
for cuts, tears and bulges.
l
b. Inspect hoses and fittings Hose or fittings leak.
for and leaks.
2-6
