TM   10-3835-223-13&P Table  2-1.  Operator  Preventive  Maintenance  Checks  and  Services  -  cont. B  -  Before D - During A - After Interval 8 9 10 11 12 13 14 15 Item No. B D A l l l l l l l Item to Be Inspected Enclosure (Electrical) Frame Fuel   Hoses Guards Top   Frame Rollers Hose  Reels Brakes Procedure Check  for and  have  repaired  or adjusted as necessary Equipment  Is  Not Ready/Available If: Inspect  for  dents,  damaged or  missing  hardware/data plates,   missing   cover. Missing    cover. Inspect  for  damaged  or missing  hardware  and plastic   guide   slips. a.  Inspect  hose  for  cuts, Hose  leaks,  is  cut,  torn,  or deep  abrasions,  tears  and cracked  and  cannot  be cracks. repaired. b.  Inspect  for  leaks. inspect  for  loose  or  missing guard   panels. Guard   panels   missing. a.  Inspect  for  cracks  and bends. b.  Inspect  for  loose  or missing  nuts,  bolts,  and washers. Cracks  or  bends  prevent operation   of   system. Nuts and bolts are missing or  cannot  be  tightened. Inspect for bent rollers. Verify that rollers turn freely. Rollers are bent or will not turn. a.  Inspect  hose  reel  bearing supports  for  cracks. Bearing   support   is   cracked. b.  Inspect  for  loose  or missing  nuts  and  bolts  at bearing    supports. Nuts and bolts missing or cannot   be   tightened. a.  Check  operation  of  brake components.  Adjust  brake handle  to  securely  lock  reel in   position. Brakes  will  not  operate. Brakes will not lock reels. b. Inspect brake pad lining. Brake  pads  worn  down  to rivet   heads. 2-8