TM 10-4130-237-14
5-11. COMPRESSOR DISCHARGE HOSE REPLACEMENT (CONT)
a. R e m o v al
1
Cut tie wrap as needed to free refrigerant line.
2
Remove hose fitting from compressor.
3
Remove hose fitting from tee fitting.
b.
Installation
1
2
3
4
5
6
Install hose fitting at tee fitting.
Install hose fitting at compressor discharge service port.
Move refrigerant line and ignition wire back to hose. Install tie wraps around hose and refrigerant line.
NOTE
If any refrigeration system components have been removed or replaced, in-
stall anew filter-drier before evacuating system (para 519).
Leak-test system (para 5-7).
Evacuate system (para 5-9).
Charge system (para 5-9).
INITIAL SETUP
5-12. HIGH PRESSURE SWITCH REPLACEMENT
This task covers
a. Removal
b. Installation
Master Mechanics Tool Kit,
item 4, appedix B
Tags item 22,appendix E
Tools
Materials/Parts
5-41