TM 10-4130-237-14
6-2.
CYLINDER BLOCK ASSEMBLY REPAIR/OVERHAUL (CONT)
36
37
Open spring compressor about 3/8 to 1/2 in. (10 to 13 mm) while pushing valve all the way through
spring retainer.
Snap retainer onto valve and release spring tension. Remove compressor from valve chamber.
38
39
40
41
42
43
Insert exhaust valve spring and retainer into valve spring compressor. Compress valve spring.
Insert compressed spring and retainer into right valve chamber.
Push exhaust valve through retainer so it is fully seated.
Place collars into valve stem groove. Grase may be applied to collars and valve stem for ease in as-
sembly.
Lower compressor tool so spring retainer fits over collars. Release spring tension and remove spring
compressor.
Repeat steps 29 through 41 for left cylinder.
6-26