TM 10-4130-237-14
6-2.
CYLINDER BLOCK ASSEMBLY REPAIR/OVERHAUL (CONT)
16 Push right piston and connecting rod assembly into right cylinder.
17 Using engine oil (MIL-L-46152), lubricate crankpin.
18 Pull connecting rod against crankpin and place end cap with dipper around crankpin. Make sure assem-
bly marks on connecting rod and end cap are alined.
19 Install end cap mounting bolts and torque to 190 in. lb (22Nm).
20 Bend tabs on dipper back around mounting bolts.
6-21
