Table 1-1. Nomenclature Cross-Reference List

CHAPTER 1 INTRODUCTION - TM-10-4320-303-13_13

SECTION II. EQUIPMENT DESCRIPTION - TM-10-4320-303-13_15

TM-10-4320-303-13 Tactical Water Distribution Equipment System (TDWS) Set 10-Mile Segement Model 06749-0813-81 110-00-0000 919 and 10 Manual
Page Navigation
2

TM 10-4320-303-13 Table 1-1. Nomenclature Cross-Reference List. Common Nomenclature Official Nomenclature 125 GPM Pumping Assembly Pump, Centrifugal; Frame MTD, 2 Inch 125 GPM, 50 Foot Head 600 GPM Pumping Assembly (Assemblies) Pumping Assembly, Water, 600 GPM, Model 609-A, Model 609-C, and Model US636HCCD-1 20,000 Gallon Pillow Tank 20,000 Gallon Collapsible Fabric Tank Hypochlorination Unit, Model 1955-1 Water Purification Hypochlorination Unit, Frame-Mounted, Automatically Controlled, 100 GPM, Model 1955-1 Hypochlorination Unit, Model 1955-3 Water Purification Hypochlorination Unit, Frame-Mounted, Automatically Controlled, 350 GPM, Model 1955-3 Hypochlorination Unit, Model A-506131 Hypochlorination Unit, Water Purification, Frame Mounted, Water Driven, 100 GPM Water Storage Bag Bag, Water Sterilizing 1.7 EQUIPMENT IMPROVEMENT RECOMMENDATION (EIR). If your TWDS needs improvement, let us know. Send us an EIR. You, the user, are the only one who can tell us what you don't like about your equipment. Let us know why you don't like the design or performance. Put it on Standard Form (SF) 368 (Product Quality Deficiency Report). Mail it to us at Commander, U.S. Army Aviation And Troop Command, ATTN: AMSAT-I-MDO, 4300 Goodfellow Boulevard, St. Louis, MO 63120- 1798. We will send you a reply. 1.8 WARRANTY INFORMATION. The TWDS is not a warranted system. 1.9 SAFETY, CARE, AND HANDLING. WARNING and CAUTION statements have been strategically placed throughout this manual prior to operating or maintenance procedures, practices, or conditions considered essential to the protection of personnel (WARNING) or equipment or property (CAUTION). Prior to the performance of any task read and understand all WARNINGS and CAUTIONS pertaining to the task at hand. Failure to do so may result in personnel injury, damage to equipment, or both. 1.10 CORROSION PREVENTION AND CONTROL (CPC). Corrosion Prevention and Control (CPC) of Army materiel is a continuing concern. It is important that any corrosion problems with this item be reported so that the problem can be corrected and improvements can be made to prevent the problem in future items. While corrosion is typically associated with the rusting of metals, it can also include deterioration of other materials, such as rubber and plastic. Unusual cracking, softening, swelling, or breaking of these materials may be a corrosion problem. If a corrosion problem is identified, it can be reported using Standard Form 368, Product Quality Deficiency Report. Use of key words such as "corrosion," "rust," "deterioration," or "cracking" will ensure that the information is identified as a CPC problem. The form should be submitted to the address specified in DA PAM 738-750. 1.11 CALIBRATION. The TWDS does not contain equipment which requires calibration. 1-2

Privacy Statement
Press Release
Contact