Table 1-4. Description of Major Components for TWDS Boost Pumping Station. (Continued)

LOCATION AND DESCRIPTION OF MAJOR COMPONENTS - TM-10-4320-303-13_18

LOCATION AND DESCRIPTION OF MAJOR COMPONENTS - CONTINUED - TM-10-4320-303-13_20

TM-10-4320-303-13 Tactical Water Distribution Equipment System (TDWS) Set 10-Mile Segement Model 06749-0813-81 110-00-0000 919 and 10 Manual
Page Navigation
7

TM 10-4320-30313 Table 1-4. Description of Major Components for TWDS Boost Pumping Station. (Continued) Item No. Item Name Description and Purpose 2 6 INCH BUTTERFLY VALVE Three are used for the boost pumping station layout. Used to control water flow into boost pumping assembly, around boost pumping assembly and from boost pumping assembly to hoseline. 3 LATERAL PIPE FITTING Two are used for the boost pumping station layout. Used to connect 6 inch x 500 foot collapsible hose assembly, 6 inch x 10 foot, 20 foot, and 75 foot hose assemblies. 4 HOSE ASSEMBLY 6 inch x 10 foot, collapsible hose assembly. Directs flow of water into suction port of boost pumping assembly. 5 HOSE ASSEMBLY 6 inch x 20 foot, collapsible hose assembly. Directs water flow from pumping assembly to hoseline. 6 BYPASS HOSE ASSEMBLY 6 inch x 75 foot, collapsible hose assembly. Directs flow of water around boost pumping station to hoseline. 7 CHECK VALVE Retards water from flowing into pumping assembly through discharge elbow. Figure 1-5. Location of Major Components for TWDS Storage Assembly. Table 1-5. Description of Major Components for TWDS Storage Assembly. Item No. Item Name Description and Purpose 1 6 INCH X 6 INCH X 4 INCH PIPE TEE Used to connect storage assembly to hoseline. 2 4 INCH GATE VALVE ASSEMBLY Used to control water flow into storage assembly. 3 4 INCH X 10 FOOT HOSE ASSEMBLY Directs water flow from 4 inch gate valve to filler fitting on water storage tank. 1-7

Privacy Statement
Press Release
Contact