TM 10-4610-234-13
5.2 DISTRIBUTION NOZZLE (1-INCH) REPAIR - continued.
(9)
(10)
(11)
(12)
(13)
(14)
(15)
Remove packing nut (14).
Pull stem (15) from body (3).
Remove packing gland (13) and packing ring (12).
Remove cap slowly. Spring tension may cause cap to fly off.
Remove cap (8) and spring (7).
Remove poppet (6), disc (5) and disc nut (4) from body (3) and disassemble.
Remove jam nut (2) and tube (1) from body (3).
Remove jam nut (2) from tube (1).
b. Cleaning.
(1) Clean all components with clean water and detergent.
(2) Rinse components in clean water and dry with wiping rag.
c. Inspection.
(1) Inspect body (3) for cracks and stripped or damaged threads,
(2) Inspect guard (21) and lever (16) for cracks.
(3) Inspect tube (1) for bends, cracks and deformation.
(4) Inspect stem (15) for scoring. Check that stem is straight.
5-2
