TM 10-4610-234-13
5.2
d. Repair. Replace damaged parts and all sealing components.
e. Assembly.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
Install jam nut (2) on tube (1).
Install tube (1) in body (3) and tighten jam nut (2).
Assemble disc nut (4), disc (5) and poppet (6) and install in body (3).
Install spring (7) and cap (8).
Install packing ring (12) and packing gland (13).
Push stem (15) into body (3).
Install packing nut (14).
Apply anti-seize tape to threads of coupling half (10). Screw coupling half into swivel (9).
Apply anti-seize tape to threads of swivel (9). Screw swivel and attached coupling half (10) into
body (3).
NOTE
Ensure gasket is fully seated in groove of coupling.
Install gasket (11) in coupling half (10).
Position lever (16) on guard (21) and install hollow pin (19).
NOTE
Hollow pin (18) is longer than hollow pin (20).
Position guard (21) on body (3) and install two hollow pins (18 and 20).
Connect tube cap (25) to chain (23) with S-hook (24).
Connect chain (23) to bodv (3) with S-hook (22).
5-4
DISTRIBUTION NOZZLE (1-INCH) REPAIR - continued
