TM 10-4610-234-13
5.3 WATER PRESSURE REGULATOR ASSEMBLY REPAIR.
This task consists of:
a. Disassembly
d. Repair
b. Cleaning
e. Assembly
c. Inspection
INITIAL SET-UP:
Tools:
Tool Kit, General Mechanics, Automotive (Appendix B, Sec. III, item 1)
Vice (Appendix B, Sec. III, Item 2)
Materials/Parts Required:
Detergent, General Purpose (Item 1, Appendix D)
Rag, Wiping (Item 2, Appendix D)
Tape, Anti-seize (Item 3, Appendix D)
Diaphragm - 1781
Gasket, Coupling - MS27030-1
a. Disassembly.
(1) Remove four nuts (1) and washers (2).
(2) Lift regulator assembly (3) from threaded rods (8).
(3) Remove four nuts (13) and washers (12).
(4) Remove four threaded rods (8) and attached parts from board (11 ).
(5) Remove washers (6 and 10) and nuts (7 and 9) from threaded rods (8).
(6) Remove coupling half (4) from regulator assembly (3).
(7) Remove gasket (5) from coupling half.
(8) Remove coupling half (14) from regulator assembly (3).
5-6
