TM 10-4610-234-13
Hose Nozzle Connection Kit Assembly
9.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
To prevent contamination of drinking water, make sure protective
caps and plugs are installed in components when not in use.
•
•
NOTE
Install all gate valves with hand wheel in upright position and valve fully
closed.
Four nozzle connection kits are used in the 40K Water Distribution Sys-
tem. After each kit is assembled, they are all connected to form one dis-
tribution point.
Connect discharge hose (53) to tee (35) (See connection point C-C).
Connect discharge hose (20 ft) (54) to discharge hose (53).
Connect tee (61) to discharge hose (54).
Connect reducer (55) to tee (61).
Connect gate valve (56) to reducer (55).
Connect discharge hose (20 ft) (57) to gate valve (56).
Connect reducer (58) to discharge hose (57).
Connect discharge hose (25 ft) (59) to reducer (58).
Connect distribution nozzle (60) to discharge hose (59).
Unfold nozzle stand (62) and attach distribution nozzle (60) to bracket on stand.
Assemble three remaining hose nozzle connection kits as described in steps (2) through (10).
Connect all hose nozzle connection kits together.
2-29
