TM 10-4610-234-13
h. Bag Filler Connection Kit Assembly.
To prevent contamination of drinking water, make sure protective
caps and plugs are installed in component when not in use.
NOTE
• Install all gate valves with hand wheel in upright position and valve fully
closed.
• Bag filler kit is connected to the last hose nozzle connection kit.
(1) Connect discharge hose (20 ft) (63) to tee (61) (point E-E) on hose nozzle connection kit.
(2) Connect discharge hose (20 ft) (64) to discharge hose (63).
(3) Connect tee (65) to discharge hose (64).
(4) Connect reducer (77) to tee (65).
(5) Connect discharge hose (20 ft) (66) to reducer (77).
(6) Connect wye (67) to discharge hose (66).
(7) Connect discharge hose (20 ft) (68) to wye (67).
(8) Connect gate valve (69) to discharge hose (68).
(9) Connect discharge hose (25 ft) (70) to gate valve (69).
(11) connect wye (75) to discharge hose (76).
(12) Connect gate valve (72) to wye (75) and discharge hose (25 ft) (71) to gate valve (72).
(13) Connect gate valve (74) to wye (75) and discharge hose (25 ft) (73) to gate valve (74).
2-31
(10) Connect discharge hose (20 ft) (76) to wye (67).
