TM 10-4610-243-13
2-15. PREPARATION FOR MOVEMENT - cont.
h.
Disassemble 350 Gpm Pump Connection Kit (Distribution Point). Refer to Figure 2-32.
WARNING
To prevent contamination of water system components, keep dirt mud, sand, and
debris from entering open couplings during disassembly. Make sure protective caps
and plugs are installed after components are disassembled.
To prevent injury to personnel, all water pumps must be shutdown and water
pressure relieved from discharge hoses before disconnecting couplings.
(1)
Disconnect 10 foot discharge hose (20) (part of dual tank connection kit no 5) from adapter (18).
(2)
Disconnect male x male adapter (18) from 10 foot discharge hose (19) (part of dual tank connection kit
4).
(3)
Disconnect tee (17) from water meter (16).
(4)
Disconnect water meter (16) from 20 foot discharge hose (15).
(5)
Disconnect 20 foot discharge hose (15) from male (outlet) coupling on hypochlorination unit (14).
(6)
Disconnect end of 20 foot discharge hose (13) from female (inlet) coupling on hypochlorination unit (14).
(7)
Disconnect 20 foot discharge hose (13) from tee (12).
(8)
Disconnect tee (12) from 20 foot discharge hose (11).
(9)
Disconnect 20 foot discharge hose (11) from 4-inch gate valve (10).
(10)
Disconnect 4-inch gate valve (10) from 20 foot discharge hose (9).
(11)
Disconnect of 20 foot discharge hose (9) from male (discharge) coupling on 350 gpm pump (8).
(12)
Disconnect 20 foot suction hose (7) from female (suction) coupling on 350 gpm pump (8).
(13)
Disconnect 20 foot suction hose (7) from 4-inch gate valve (6).
(14)
Disconnect 4-inch gate valve (6) from tee (5).
(15)
Disconnect tee (5) from 20 foot suction hose (4).
(16)
Disconnect 20 foot suction hose (4) from tee (1).
(17)
Disconnect 10 foot discharge hose (2) (part of dual tank connect kit no. 4) from tee (1).
(18)
Disconnect 20 foot discharge hose (3) (part of dual tank connection kit no. 5) from tee (1).
2-80
