TM 10-4610-243-132-15. PREPARATION FOR MOVEMENT - cont.(14)Roll up all discharge hoses and secure with tape.(15)Prepare 125 gpm pump (6) for movement. Refer to the applicable TM.j.Disassemble350GpmPumpConnectionKit(WaterSource). Refer to figure 2-34.WARNINGTo prevent contamination of water system components, keep dirt mud, sand, anddebris from entering open couplings during disassembly. Make sure protective capsand plugs are installed after components are disassembledTo prevent injury to personnel, all water pumps must be shutdown and waterpressure relieved from discharge hoses before disconnecting couplings.(1)Disconnect 10 foot discharge hose (3) (part of dual tank connection kit 4) from tee (1).(2)Disconnect 10 foot discharge hose (2) (part of dual tank connection kit 5) from tee (1).(3)Disconnect water meter (4) from tee (1).(4)Disconnect water meter (4) from 20 foot discharge hose (5).(5)Disconnect 20 foot discharge hose (5) from male (outlet) coupling on hypochlorination unit (6).(6)Disconnect 20 foot discharge hose (7) from female (inlet) coupling on hypochlorination unit (6).(7)Disconnect tee (8) from 20 foot discharge hose (7).(8)Disconnect 20 foot discharge hose (9) from tee (8).(9)Disconnect 4-inch gate valve (10) from 20 foot discharge hose (9).(10)Disconnect 20 foot discharge hose (11) from 4-inch gate valve (10).(11)Disconnect end of 20 foot discharge hose (11) from male (discharge) coupling on 350 gpm pump (12).(12)Disconnect 20 foot suction hose (13) from female (suction) coupling on 350 gpm pump (12).(13)Disconnect 4-inch gate valve (14) from 20 foot suction hose (13).2-84
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business