TM 10-4610-243-13
4-30. TEE ASSEMBLY (9112-Y4) REPAIR.
This task consists of:
a.
Disassembly
b.
Cleaning
c.
Inspection
d.
Repair
e.
Assembly
INITIAL SET-UP :
Tools:
Wiping Rag (Item 2, App E)
General Mechanics Tool Kit (Item 1, App B)
Tape, Anti-seize (Item 3, Appendix E)
Equipment Condition:
Gasket (Item 4, App I)
Tee assembly removed (para 3-4a)
Gasket (3) (Item 10, App I)
Material/Parts:
Lockwasher (24) (Item 11, App I)
Detergent, General Purpose (Item 1, App E)
NOTE
Ensure that all parts identified as mandatory replacement parts are
discarded and replaced with new components.
a.
Disassembly. Refer to figure 4-25.
(1)
Remove eight nuts (1), lock-washers (2), flat washers (3) and screws (4) and flat washers (5).
(3)
Separate male coupling (6) and gasket (7) from tee (23).
(3)
Remove gasket (8) from female coupling (14).
(6)
Remove eight nuts (9), lockwashers (10), flat washers (11), screws (12) and flat washers (13)
(7)
Separate female coupling (14) and gasket (15) from tee (23).
(8)
Remove eight nuts (16), Iockwashers (17), flat washers (18), screws (19) and flat washers (20).
(9)
Separate male coupling (21) and gasket (22) from tee (23).
b.
Cleaning.
(1)
Wash all components with clean water and detergent.
(2)
Rinse components in clean water and dry with wiping rag.
c.
Inspection.
(1)
Inspect male couplings (6 and 21) for cracks.
(2)
Inspect female coupling (14) for cracks and damaged lock arms.
(3)
Inspect tee (23) for cracks and corrosion.
4-80
