TM 10-4610-243-13
4-30. TEE ASSEMBLY (9112-Y4) REPAIR - cont.
d.
Repair. Replace defective components. Do not reuse sealing components.
e.
Assembly. Refer to figure 4-26.
(1)
Position gasket (22) and male coupling (21) on tee (23).
(2)
Install eight flat washers (20), screws (19), flat washers (18), lockwashers (17) and nuts (16).
(3)
Position gasket (15) and female coupling (14) on tee (23).
(4)
Install eight flat washers (13), screws (12), flat washers (11), lockwashers (10) and nuts (9).
NOTE
Ensure gasket is fully seated in groove of coupling.
(5)
Install gasket (8) in female coupling (14).
(6)
Position gasket (7) and male coupling (6) on tee (23).
(7)
Install eight flat washers (5), screws (4), flat washers (3) lockwashers (2) and nuts (1).
(8)
Install tee assembly in water system (para 3-4a).
(9)
Startup water system (para 2-12c) and check tee assembly for leaks.
4-82
