TMI 10-4610-243-13
4-35.
DUAL TANK CONNECTION KIT MAINTENANCE.
The dual tank connection kit consists of the components listed below. Refer to the following paragraphs for applicable
maintenance procedures.
Procedure
Para.
Suction and Discharge Hose Repair ....................................................................................................
4-14
Tee and Gate Valve Assembly (9114-Y1) Repair ................................................................................
4-36
Tee and Gate Valve Assembly (9114-Y2) Repair ................................................................................
4-37
Tee and Gate Valve Assembly (9114-Y5) Repair ................................................................................
4-38
Tee and Gate Valve Assembly (9114-Y6) Repair ................................................................................
4-39
4-36.
TEE AND GATE VALVE ASSEMBLY (9114-Y1) REPAIR.
This task consists of
a.
Disassembly
b.
Cleaning
c.
Inspection
d.
Repair
e.
Assembly
INITIAL SET-UP:
Tools:
Material/Parts:
General Mechanics Tool Kit (Item 1, App B)
Detergent, General Purpose (Item 1, App E)
Vice (Item 2, App B)
Wiping Rag (Item 2, App E)
Equipment Condition:
Gasket (3) (Item 3, App I)
Tee and gate valve assembly removed (para 3-4a)
Gasket (4) (Item 10, App I)
Lockwashers (32) (Item 11, App I)
NOTE
Ensure that all parts identified as mandatory replacement parts are discarded and replaced with
new components.
a.
Disassembly. Refer to figure 4-31.
(1) Disconnect ring (1) from male coupling (9) and remove cap (3).
(2) Remove gasket (2) from cap (3).
(3) Remove eight nuts (4), lockwashers (5), flat washers (6), screws (7) and flat washers (8).
(4) Separate male coupling (9) and gasket (10) from gate valve (16).
(5) Remove eight nuts (11), lockwashers (12), flat washers (13), screws (14) and flat washers (15).
(6) Separate gate valve (16) and gasket (17) from tee (38).
(7) Disconnect ring (18) from female coupling (26) and remove plug (19).
4-96
