TM 10-4610-243-13
4-42. TEE ASSEMBLY (9115-Y1) REPAIR - cont.
c. Inspection.
(1)
Inspect male couplings (9 and 16) for cracks.
(2)
Inspect female coupling (26) for cracks and damaged lock arms.
(3)
Inspect tee (28) for cracks and corrosion.
d. Repair. Replace defective components. Do not reuse sealing components.
e
Assembly. Refer to figure 4-41.
(1)
Position gasket (27) and female coupling (26) on tee (28).
(2)
Install eight flat washers (25), screws (24), flat washers (23), lockwashers (22) and nuts (21).
NOTE
Ensure gasket is fully seated in groove of coupling.
(3)
Install gasket (20) in female coupling (26).
(4)
Connect plug (19) to female coupling (26) with ring (18).
(5)
Position gasket (17) and male coupling (16) on tee (28).
(6)
Install eight flat washers (15), screws (14), flat washers (13), lockwashers (12) and nuts (11).
(7)
Position gasket (10) and male coupling (9) on tee (28).
(8)
Install eight flat washers (8), screws (7), flat washers (6) lockwashers (5) and nuts (4).
NOTE
Ensure gasket is fully seated in groove of cap.
(9)
Install gasket (2) in cap (3)
(I0)
Connect cap (3) to mate coupling (9) with ring (1)
(11)
Install tee assembly in water system (para 3-4a).
(12)
Startup water system (para 2-12c) and check tee assembly for leaks.
4-118
