TM10-5430-229-13&P Table 2-1.  Operator Preventive Maintenance Checks and Services For Tank Storage Chest 1 Before TOP COVER a. Inspect handle assemblies Handle assemblies are ASSEMBLY for damage.  Check for damaged.  Attaching loose or missing attaching hardware is loose or hardware. missing. b. Inspect panel for holes Panel assembly has and cracks.  Check for holes or is cracked. Loose or missing attach- Attaching hardware is ing hardware. loose or missing. 2 Before DOCUMENT Check for torn or missing POUCH document pouch. 3 Before END PANEL a. Inspect for bent turnlock Turnlock handle is bent. ASSEMBLIES handles. b. Inspect panel for holes and Panel assembly has cracks.  Check for loose or holes or is cracked. missing attaching hard- Attaching hardware is ware loose or missing. 4 Before SIDE PANEL a. Check channel assemblies Channels are badly bent. ASSEMBLIES for bent metal.  Insure Latching assemblies do that all latching assemb- not function properly. lies are operable and are Locking pins are bent operable and not damaged. or missing. Inspect for bent or missing locking pins. b.  Inspect panel for holes and Panel assembly has cracks.  Check for loose or holes or Is cracked. missing attaching hard- Attaching hardware is ware. loose or missing. 5 Before STRAP a. Check for missing hoisting Hoisting straps are ASSEMBLIES straps.  Inspect straps for missing.  Straps are fraying badly frayed. b  Check for missing tiedown Tie-down straps are straps.  Inspect straps for missing.  Straps are fraying. badly frayed. 6 Before DIVIDER, Inspect for bent or missing STORAGE PAN divider pan. Item No. Procedure Location Item to Check/Service Interval Not Fully Mission Capable if: 2-6