TM10-5430-229-13&P Table 2-1.  Operator Preventive Maintenance Checks and Services For Tank Storage Chest - Continued. 7 Before SKID a. Inspect skid locking pin Locking pins are dam- ASSEMBLY assemblies for damage. aged.  Attaching hard- Check for loose or miss- ware is loose or ing attaching hardware. missing. b. Inspect for bent or miss- Cargo rings are bent ing cargo rings.  Check or missing.  Attaching for loose or missing hardware is loose or attaching hardware. missing. c. Inspect readability of identification plate. Check for loose or miss- ing attaching hardware. d. Inspect skid for cracked Skid is cracked or bent or bent metal surfaces. badly. 8 After TOP COVER a. Inspect handle assemblies Handle assemblies are ASSEMBLY for damage.  Check for damaged.  Attaching loose or missing attaching hardware is loose or hardware. missing. b. Inspect panel for holes Panel assembly has and cracks.  Check for holes or is cracked. loose or missing attach- Attaching hardware is ing hardware. loose or missing. 9 After DOCUMENT Check for torn or missing POUCH document pouch. 10 After END PANEL a. Inspect for bent turnlock Turnlock handle is bent. ASSEMBLIES handles. b. Inspect panel for holes and Panel assembly has cracks  Check for loose or holes or is cracked. missing attaching hard- Attaching hardware is ware. loose or missing. 11 After SIDE PANEL a. Check channel assemblies Channels are badly bent. ASSEMBLIES for bent metal.  Insure Latching assemblies do that all latching assemb- not function properly. lies are operable and are Locking pins are bent operable and not damaged. or missing. Inspect for bent or missing locking pins. Item No. Procedure Location Item to Check/Service Interval Not Fully Mission Capable if: 2-8