TM 10-5430-240-13&P                                  0017 00 0017 00-1 OPERATOR, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS SPECIAL TOOLS LIST) TANK ASSEMBLY INSPECTION, REPAIR AND REPLACEMENT INITIAL SETUP Tools     Tool Kit, General Mechanic     (Item 1, WP 0027 00)     Shop Equipment, Automotive     (Item 2, WP 0027 00) Materials/Parts       Repair Kit             (Item 1, WP 0034 00) Tank Assembly This procedure consists of patching cuts and punctures in the tank fabric. If the tank must be put back in immediate service, or materials are not available, perform emergency repairs instead of this task. There are three methods to repair water holding tank fabric.  Preferred Method: Patches are used on both the inside and outside of the tank.  First Alternate: Single patch on the inside of the tank.  Second Alternate: Single patch on the outside of the tank. Fabric that does not hold water needs only one exterior patch. 1.  Ensure all components of the repair kit (ROCTAD) are present: Table 1. Collapsible Fabric and Drums Repair Components. DESCRIPTION ITEM No. QUANTITY Coated Fabric Patches (18X18 Inches) Scuffing Brush Q.D. Surface Conditioner D&A Fluid Elastomer Base D&A Fluid Elastomer Solidifier Mixing Stirrer Protective Gloves, Disposable Synthetic Brush, Bristle, 1 In wide Cleaning and Solvent Cloth Cleaner/Degreaser Spatula, Application Protective Sheets Respirator Mask Instructions Material Safety Data Sheets Reusable Bag Razor Knife Mixing Bowl 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 2 1 2 Cans 2 Cans 2 Cans 1 2 Pair 3 1 1 Can 2 1 2 1 2 Sets 1 1 2