TM 10-5430-243-12&P
0025 00
Change 1
0025 00-2
SERVICE
1. Clean vent cap (1) and all components with detergent and water, then rinse thoroughly in clean water
and dry with wiping rag.
2. Inspect vent cap (1) for bent or damaged pivot pin. Check for freedom of movement. If damaged,
replace vent cap (1).
3. Inspect all parts for cracks, dents, distortion, breaks, wear, or other damage. If any parts are no longer
serviceable, replace before performing installation.
4. Inspect bolts (7) for damaged or distorted threads. If damaged, replace bolts (7).
5. Clean o-ring seal groove surface thoroughly with detergent and hot water, for GTA Models and
Reliance Models only.
1
3
2
13
14
5
4
9
12
10
11
8
7
6
