TM 10-5430-243-12&P 0026 00 0026 00-3/4 blank REPAIRRepair is limited to replacement of damaged components. ASSEMBLY 1. Install new gasket (15) into dust cap (16). 2. Install new elbow gasket (4) into elbow (1). 3. Position new flanged adapter gasket (14) on closure plate (7), and align the holes. 4. Position flanged adapter (3) on flanged adapter gasket (14), and align the holes. 5. Install eight screws (12) through the holes in flanged adapter (3), and thread screws (12) through. 6. Assemble new gaskets (13), new lockwashers (11), and nuts (10) to screws (12). Torque the fastening hardware to 16 ft-lbs (21.70 Nm). 7. Lubricate new o-ring seal (9) with silicone compound. Position o-ring seal (9) into packing groove. 8. Install closure plate (7) and attached components through the opening in the tank, until closure plate (7) contacts tank fitting (8). NOTE If the tank is lying completely flat, lift the tank to the closure plate to begin threading the screws through the tank fitting. 9. Assemble twenty washers (6) onto screws (5). Install screws (5) through closure plate (7) and tank fitting (8). 10. Torque fastening screws (5) to 16 ft-lb (21.70 Nm). 11. Position elbow (1) on flanged adapter (3), and push cam-lever arms (2) inward, locking elbow (1) to flanged adapter (3). END OF WORK PACKAGE
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
