TM 10-5430-243-12&P 0028 00 Change 1 0028 00-2 REPAIR Repair is limited to replacement of damaged components. ASSEMBLY 1. Lubricate new o-ring (10) with silicone compound. Position o-ring (10) into packing groove located on tank compression fitting (9). 2. Position drain cover plate (5) on the tank compression fitting (9). Align drain cover plate (5) towards nearest tank edge and align fastening holes. 3. Install drain cover plate (5) and bracket (6) to the tank fitting with eight bolts (7) and washers (8), by hand-tightening bolts (7). 4. Attach S-hook (or key ring) of chain assembly (1) to bracket (6). Torque all bolts (7) in sequence to 15 ft-lb (20.34 Nm) for Reliance Models, or 16 ft-lb (21.70 Nm) for GTA Container Models and MPC Models. 5. Apply anti-seize tape to drain plug screw (3) threads. 6. Install drain plug (4), drain plug screw (3), and bracket (2) to drain cover plate (5). 7. Connect S-hook (or key ring) to the remaining end of chain assembly (1). 8. Attach S-hook of chain assembly (1) to bracket (2). END OF WORK PACKAGE 1 2 3 4 5 6 7 8 10 9
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
