TM 10-8110-201-14&P
Section VI. MAINTENANCE OF PRESSURE CONTROL
3-15. Pressure Control.
a. Cleaning and Inspection.
(1) Using a mild soap and water solution with a
stiff bristle brush, remove any foreign matter from
the pressure control (fig. 3-3).
(2) Inspect the pressure control for cracked,
loose or missing parts.
b. Replacement.
(1) Disconnect and remove the pressure con-
trol from the hose assemblies.
(2) Replace unserviceable pressure control.
3-16. Hose Assembly.
a. Cleaning. Wash the hose assembly (fig. 3-11)
in a mild soap and water solution and dry it with a
clean cloth.
b. Inspection. Inspect the hose assembly for the
following:
(1) Cut, cracked or deteriorated hose (1, fig.
3-11).
(2) Cracked, broken or missing dust cap (3) and
dust plug (6).
(3) Missing or worn gaskets (2).
(4) Broken or missing chains (5).
(5) Broken or missing key rings (4).
c. Replacement. Replace unserviceable hose
assembly.
Figure 3-11. Hose Assembly
3-16
