TM 10-8110-201-14&P
3-10. Check Valve Assembly Adapter.
a. Cleaning and Inspection.
(1) Using a mild soap and water solution with a
stiff bristle brush, remove any foreign matter from
the exterior of the check valve assembly adapter.
(2) Inspect check valve assembly adapter (fig.
3-8) for a broken chain, cracked or missing dust
cap, worn check valve assembly body, damaged or
missing gasket and ring(s) and evidence of leaking
around threads and around check valve assembly.
b. Replacement.
(1) Turn handwheel (fig. 3-2) clockwise to close
the valve.
(2) Disconnect coupler valve assembly from
check valve assembly adapter.
(3) Remove chain and dust cap from check
valve assembly adapter.
(4) Remove check valve assembly adapter
from drum.
(5) Apply a coating of anti-seize compound
(item 2, App. E), to threads of serviceable check
valve assembly adapter, and install it in the drum
(fuel drum only).
(6) Attach chain and dust cap to check valve
assembly adapter.
(7) Connect coupler valve assembly to check
valve assembly adapter.
(8) Refill drum as necessary.
Figure 3-8. Check Valve Assembly Adapter
3-12
