TM 10-8110-201-14&P 3-12. Drum Tiedown Kit a. Side Brackets. Drycleaning  solvent,  P-D-680,  used  to clean  parts^- is  potentially  dangerous  to personnel and property. Use in a well- ventilated  area  as  the  fumes  are dangerous  if  inaled.  Avoid  repeated  and prolonged  skin  contact.  Do  not  use  near open flame or excessive heat. Flash point of solvent is 100°F - 138°F (38°C - 59°C). (1) Wash  the  brackets  (fig.  3-10)  in  drycleaning solvent (item 1, App. D), to remove all foreign mat- ter. (2) Inspect  side  brackets  for  cracks  and  bent  or missing  parts. (3) Replace  unserviceable  side  brackets  with serviceable  ones. b.  Chain  Assemblies. Drycleaning solvent, P-D-680, used to clean  parts  is  potentially  dangerous  to personnel  and  property,  Use  in  a  well- ventilated  area  as  the  fumes  are dangerous if inhaled. Avoid repeated and prolonged skin contact. Do not use near flame or excessive heat. Flash point of solvent is 100°F - 138°F (38°C - 59°C). (1) Wash  the  front  chain  assemblies  and brackets  (fig.  3-10),  intermediate  chain  assemblies (4) and rear chain assemblies and brackets in drycleaning solvent (item 1, App. D) to remove any foreign  matter. (2) Inspect the chain assemblies for cracked or broken links and hooks and damaged or missing sleeve. (3) Inspect  front  and  rear  brackets  for  cracks and  bends. (4) Replace  any  unserviceable  chain  assembly or  chain  assembly  and  bracket  with  a  serviceable one. c. Load Binders. Drycleaning  solvent,  P-D-680  used  to clean parts is potentially dangerous to personnel and property. Use in a well- ventilated  area  as  the  fumes  are dangerous if inhaled. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive heat. Flash point of solvent is 100°F - 138°F (38°C - 59°C). (1)  Wash  the  load  binders  (fig.  3-10)  in drycleaning solvent (item 1, App. D) to remove any foreign  matter. (2) Inspect  the  load  binders  for  cracked, broken,  bent  or  missing  parts. (3) Replace unserviceable load binders. 3-13. Repair Kit, Type I. a. Cleaning and Inspection. Drycleaning solvent, P-D-680, used to clean parts is potentially dangerous to personnel and property. Use in a well- ventilated  area  as  the  fumes  are dangerous if inhaled. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive heat. Flash point of solvent is 100°F - 138°F (38°C - 59°C). (1) Wash the pliers (1, fig. 3-5) and the rotary cutter in drycleaning solvent (item 1, App. D), and dry them with a clean cloth. (2) Using  a  stiff  bristle  brush,  remove  foreign matter from the pouch (2). (3) Wash the face protective hood (4) with clear water, and dry it with a clean cloth. (4) Using a mild soap and water solution with a stiff bristle brush, remove foreign matter from wood  plugs  (6)  and  mechanical  patches  (7). (5) Inspect  the  pouch  for  rips  and  broken  or missing  snap  fasteners. (6) Inspect the pliers and rotary cutter for cracks and excessive wear. 3-14