TM 10-8110-202-13 & P
Table 5-1. Direct Support Maintenance Troubleshooting - Continued
M A L F U N C T I ON
TEST OR INSPECTION
CORRECTIVE ACTION
4. LEAKAGE THROUGH ADAPTER ASSEMBLY
Step 1. Check condition of adapter assembly (2).
Repair adapter assembly (para 5-8).
5. LEAKAGE FROM AROUND BEARING
PLATE (3), SWIVEL PLATE (4), OR
CLOSURE RING (5)
Step 1.
Check for loose screws (6)
Tighten screws. If
leakage continues,
repair drum (para
5-4).
6. BINDING SWIVEL PLATE
Step 1.
Check condition of swivel plate (4).
Remove and clean bearing plate (3), swivel plate (4), and closure ring (5)
(para 5-4, 5-9).
7. DRUM IS MISSHAPEN AND DISTORTED
Step 1. Check condition of cable assemblies (8).
Disassemble drum and replace
cable assemblies as required
(para 5-4, 5-10).
8. PUNCTURE AND LEAK IN DRUM BODY
Step 1.
Locate puncture and/or leak.
Permanently repair puncture hole (para 5-11).
5-4
